EMG SPECIFICATION
EMG specification
Camber or dish
Maximum flatness deviation 0.10% of the height.
![emg emg](https://emgdiesupplies.com/wp-content/uploads/2018/10/emg.png)
Coil set
Deviation from a straight line – maximum peak height 5 mm/1 metre for cut lengths and 10 mm/1 metre for coils.
![emg 2 emg 2](https://emgdiesupplies.com/wp-content/uploads/2018/10/emg-2.png)
Twist
Maximum 0.5 mm in 1 metre lengths.
![emg 3 emg 3](https://emgdiesupplies.com/wp-content/uploads/2018/10/emg-3.png)
Straightness
Deviation from a straight line – peak height maximum +/- 0.50 mm in 1 metre lengths or +/- 0.12 mm in 0.5 metre lengths.
![emg 4 emg 4](https://emgdiesupplies.com/wp-content/uploads/2018/10/emg-4.png)
Surface
The maximum surface roughness allowed is Ra 0.5 μm.
Edge angle
+/- 1º for all edge angles.
![tech tech](https://emgdiesupplies.com/wp-content/uploads/2018/10/tech.png)